Inge dizzer L 40 PB, Assembly Instructions Manual

Page: 11 / 60

Safety
dizzer
®
L Series horizontal
– Assembly Instructions 2.2(2019-06) E inge
Page 11 of 60
© inge GmbH
2.3 Standards and Laws

The modules of the dizzer
®
L Series of inge GmbH are subject to the EC pressure equipment
directive 2014/68/EU, Article 4, Sector 3.

The locally applicable normative and/or statutory requirements for the installation and
disassembly of the modules of the dizzer
®
L Series must be complied with.

For tools, equipment, machines and facilities that are not included in the delivery, the conditions
and instructions of the respective manufacturer apply.
2.4 Obligations of the System Integrator

Ensure that every skilled person with a supervisory capacity (= target group) has a printed copy
of these instructions available for the entire duration of the installation and disassembly.

The current instructions can be downloaded here:
http://www.inge.basf.com

On request, we can send you the desired number of printed instructions free of charge.

You can reach inge GmbH under info@inge.ag or by tel49 8192 997-700.

Make the necessary personal protective equipment available to all people involved for the
duration of the work.

In case of deficiencies or loss, immediately replace the personal protective equipment.
2.5 Obligations of the Operator

Ensure that all persons working on the modules of the modules of the dizzer
®
L Series use the
personal protective equipment (safety shoes and helmet) made available to them for the duration
of the work.

Ensure that you are immediately informed in case of deficiencies or loss of personal protective
equipment. Provide a replacement immediately and do not allow work to be performed without
complete personal protective equipment.

Ensure that all persons working on the dizzer
®
L modules have read the assembly instructions
and follow the safety instructions and procedures described herein.
WARNING
CONSIDERABLE DANGER OF INJURY!
If you begin work without having read the information on the
respective procedural step (including any potential warning
instructions), this may lead to accidents.

Ensure that the operating personnel has the necessary
qualification and is sufficiently trained.

Read the description of a procedural step completely and do not
begin implementing the step before having done so.