Avaya QE - Configuration Guide
pg. 2
2 Connecting the Ingate Firewall/SIParator
From the factory the Ingate Firewall and SIParator does not come preconfigured with an
IP address or Password to administer the unit. Web administration is not possible unless
an IP Address and Password are assigned to the unit via the Startup Tool or Console
port.
The following will describe a process to connect the Ingate unit to the network then have
the Ingate Startup Tool assign an IP Address and Password to the Unit.
Configuration Steps:
1)
Connect Power to the Unit.
2)
Connect an Ethernet cable to “Eth0”. This Ethernet cable should connect to a
LAN network. Below are some illustrations of where “Eth0” are located on each
of the Ingate Model types. On SIParator SBE connect to “ET1”.
Ingate SIParator SBE (Back)
Ingate 1190 Firewall and SIParator 19 (Back)
Ingate 1500/1550/1650 Firewall and SIParator 50/55/65
Ingate 1900 Firewall and SIParator 90
