Avaya QE - Configuration Guide
pg. 25
Configuration Steps:
1)
In the ITSP drop down list, select the appropriate ITSP vendor. Ingate has
confirmed interoperability several of the leading ITSP vendors, the unique
requirements of the vendor testing are contained in the Startup Tool. If the
vendor choice is not seen, select “Generic ITSP”.
When you select a specific ITSP vendor, the Startup Tool will have the individual
connection requirements predefined for that ITSP, the only additional entries
may be the specific site requirements.
2)
Service Providers come in one of two flavors, either they have a trusted IP
deployment or they require a Registration account.
a.
In the case where the Service Provider uses a Trusted IP deployment, all
which is required is to enter the IP Address or Domain of the Service
Providers SIP Server or SBC. Enter the IP Address here, or select “Use
domain name” and enter the FQDN of the Service Provider.
b.
In the case where the Service Provider requires the Ingate to register with
the Service Providers SIP Server or SBC, select “Use Account”. When
“Use Account” is selected, the Registration Account information from
the Service Provider is required. Information such as Username/DID,
Service Providers Domain, Authentication Username, and Authentication
Password.
