Avaya QE - Configuration Guide
pg. 13
3.3.2 Product Type: Standalone
When deploying an Ingate SIParator in a Standalone configuration, the SIParator resides
on a LAN network and on the WAN/Internet network. The Default Gateway for
SIParator resides on the WAN/Internet network. The existing Firewall is in parallel and
independent of the SIParator. Firewall is the primary edge device for all data traffic out
of the LAN to the Internet. The SIParator is the primary edge device for all voice traffic
out of the LAN to the Internet.
Configuration Steps:
1)
In Product Type, select “Standalone SIParator”.
2)
Define the IP Address and Netmask of the inside LAN (Interface Eth0). This is
the IP Address that will be used on the Ingate unit to connect to the LAN
network.
