Avaya QE - Configuration Guide
pg. 11
3.3.1 Product Type: Firewall
When deploying an Ingate Firewall, there is only one way the Firewall can be installed.
The Firewall must be the Default Gateway for the LAN; it is the primary edge device for
all data and voice traffic out of the LAN to the Internet.
Configuration Steps:
1)
In Product Type, select “Firewall”.
2)
Define the Inside (Interface Eth0) IP Address and Netmask. This is the IP
Address that will be used on the LAN side on the Ingate unit.
3)
Define the Outside (Interface Eth1) IP Address and Netmask. This is the IP
Address that will be used on the Internet (WAN) side on the Ingate unit.
a.
A Static IP Address and Netmask can be entered
b.
Or select “Use DHCP to obtain IP”, if you want the Ingate Unit to
acquire an IP address dynamically using DCHP.
