InfraTec VarioCAM Operating Instructions Manual Download Page 19

Page: 19 / 111

Operating Instruction for VarioCAM® head
6 Detailed connection description

Operating Instructions

© InfraTec GmbH 2007

6.2 VarioCAM

(VC)

VC with FireWire cable and power supply

The VarioCAM

is connected with the 6-pole

LEMO socket using the 6-pole FireWire cable
from the notebook (4-pole)/PC (6-pole). The
power supply is connected to the 14-pole LEMO
socket of the VarioCAM

via the

Adapter P

The Adapter P (power supply adapter) must
only be used in connection with the power
supply!

Fig. 12 VC with 6-pole FireWire cable and power
supply

VC with FireWire cable and battery

The VarioCAM

is connected with the 6-pole

LEMO socket using the 6-pole FireWire cable
from the notebook (4-pole)/PC (6-pole). Thereby,
the VarioCAM

is supplied with electricity via the

battery. An external power supply is not
necessary in this case.

Fig. 13 VC with 6-pole FireWire cable and battery

VC with power supply and universal
cable

The VarioCAM

is supplied with electricity via the

power supply (VarioCAM

without battery). The 6-

pole LEMO connector of the VarioCAM

power

supply is connected with the 6-pole LEMO socket
of the VarioCAM

. The universal cable is

connected to the 14-pole LEMO socket of the
VarioCAM

Fig. 14 VC with power supply and universal cable

VC with battery and universal cable

The VarioCAM

is supplied with electricity via a

battery. An external power supply is not
necessary in this case. The universal cable is
connected to the 14-pole LEMO socket of the
VarioCAM

Fig. 15 VC with battery and universal cable

InfraTec

Summary of Contents for VarioCAM
















































































































Search results

Summary of Contents for VarioCAM

Reviews:

InfraTec VarioCAM, Operating Instructions Manual, Page: 19 / 111

Search results

Summary of Contents for VarioCAM

Reviews: