InfraTec Jenoptik VarioCAM, User Manual

Page: 5 / 20

User Manual for the Thermographic System VarioCAM ® hr head
1. Introduction
User Manual © InfraTec GmbH 2012 1
1 Introduction
Dear User,
Congratulations on the purchase of your new thermographic system VarioCAM
®
hr head.
Please read these instructions carefully before operating the system for the first time. This will enable you
to make full use of the features of your new thermographic system. Please especially note the advice
regarding device safety in Chapter 2 in order to avoid damage to the thermographic system.
All the specifications in this user manual describe a completely equipped thermographic system
VarioCAM
®
hr of the “head” series. Technical data, the scope of features and accessories included in
your thermographic system may deviate from the specifications described here depending on the model
chosen and on individual adjustments. Features relating to optional equipment are marked
* in this
manual.
Principally, the description of technical data and the specific scope of features provided in the relevant
shipping documents (confirmation of order/delivery note) apply.
Further development is subject to technical progress.
Jenoptik ESW GmbH
07745 Jena / GERMANY
InfraTec GmbH
01217 Dresden / GERMANY
Phone:
+49 351 871-8615
Fax: +49 351 871-8727
E-mail: service@InfraTec.de
Note:
No part of this instruction manual may be reproduced in any form (print, photocopy, microfilm or any other
method) or processed, duplicated or distributed using electronic systems without the written permission of
JENOPTIK Laser, Optik, Systeme GmbH. This instruction manual was compiled with the necessary
diligence. No liability is accepted for damage arising from non-observance of the information contained in
this instruction manual.
Any product names and trademarks mentioned herein remain the property of their respective owners.