InfraTec Jenoptik VarioCAM, User Manual

Page: 16 / 20

User Manual for the Thermographic System VarioCAM ® hr head
6. Quick Start
12 © InfraTec GmbH 2012 User Manual
6 Quick Start
The following instructions shall help to quickly familiarise with operating the VarioCAM
®
hr head. For
obtaining professional results, we recommend to carefully read the entire manual.
6.1 Preparation
You require the following equipment:
■ VarioCAM
®
hr head ■ SD card reader*
■ Power supply unit* with LEMO plug ■ SD card*
■ IRBIS
®
software
6.2 Installation Software IRBIS ® remote
■ To be able to handle the camera, the operating software IRBIS
®
remote has to be inastalles on the
computer or notebook. The software indicates the measuring scenery taken up by the camera
■ The operation of the VarioCAM
®
hr head occurs via the “Remote control“ of the software IRBIS
®
remote. Navigate in the main menu with the buttons

,

,

,

and choose the functions with E nter.
Abb. 4 Die Bedienung der Kamera erfolgt über das Bedienfenster der IRBIS
®
Software
6.3 Start
■ Conect the camera to a PC or Notebook. Remove lens protective cover .
■ Connect the external power supply unit to the VarioCAM
®
hr head (14- pin plug into left socket, with
the red indication showing upwards) to set the electrical power supply. After system initialisation, the
Operating LED , initially flashing green, subsequently turning to permanent green, signals that the
VarioCAM
®
hr head is ready for operation
■ Start the software, connect the camera with the software and open the “”Remote Control” window to
operate the camera in the camera-menu.
■ Remove cover from SD card slot, insert SD card into card slot and return cover.
(Product similar to diaplyed)