www.austin-hughes.com
UM-PPS-02-S-Q421V1
P.19
< 1.9 > Command Line Interface ( CLI ) Access
Command Line Interface ( CLI ) allows you access the IP dongle via Telnet or Secure Shell ( SSH )
to con
fi
gure the system settings and login settings.
By default, CLI access via Telnet and SSH are both enabled whereas Telnet can be disabled.
Telnet provides the basic security of authentication by user name and password, but not the high-
security bene
fi
ts of encryption.
If you want high security access, you can use SSH for access to the command line interface. SSH
encrypts user name, password and transmitted data.
If you use SSH to access the command line interface, DISABLE Telnet.
CLI and IP dongle WEBUI shares the same login name & password ( default login name & pass-
word are “ 00000000 “ )
You can change the following settings via CLI access :
i.
System settings
- Change temperature display unit : change the temp unit to be displayed in the WEBUI
- Change system RTC date time : set the system time of the IP Dongle
- Change network settings : change the IP settings of the IP Dongle
- Change features & services
a.
Enable / disable management software support
b.
Enable / disable SNMP agent ( ONLY shown when management software support is
disabled )
c.
Enable / disable WEBUI
d.
Enable / disable UDP ( When disabled, IP dongle CANNOT be found by IP setup
utilities )
e.
Enable / disable maintenance ( service ) account
If you are using WEBUI + SNMP operation mode, please go to the IP dongle
WEBUI to search the connected PDU & con
fi
gure the SNMP settings before
you disable WEBUI via command line interface.
ii.
Login settings
- Change login name
- Change login password
- Reset to default login name & password
