LL1000P® Plate printer
Copyright © 2003-20016 InfoSight Corporation All Rights Reserved
Page 7
AUTO PRINT FEATURE
The LL1000P has been designed with a special AUTO PRINT feature which may be useful in certain
circumstances, for example when printing larger quantities of tags in a batch mode.
14. AUTO PRINT is enabled from the SETUP-PRINTER CONFIGURATION menu, which is accessed
from the main Producer screen.
15. Before inserting a plate, first load a tag into each appropriate pocket. Then carefully insert the plate into
the marker, as in step (4) above, being sure all tags remain in their pockets.
16. The plate will be drawn automatically into the printer, printing will be begin automatically (there is no
need to press the print button), and when finished printing the plate will be fully ejected automatically.
With two or more identical plates, this feature makes it possible to pre-load plate #2 with tags while
plate #1 is printing. Then as soon as plate #1 is finished it can be quickly removed and plate #2 inserted.
Printing will again begin automatically as in step (13). While plate #2 is printing, plate #1 can be unloaded
and reloaded.
This feature can greatly increase productivity and output when larger quantities of die-cut tags need to
be printed in batches.
NOTE:
Contact your sales representative or the factory for information on obtaining additional copies of
your plate, as well as custom-designed plates with multiple pockets.
