Chapter 5: Controller Maintenance
Replacing a failed DIMM Module
5-3
Step 4.
Remove the optional BBU charger board.
The BBU charger board obstructs
the DIMM module and must therefore be removed. See
Section 5.3.3
below.
Step 5.
Insert the new DIMM module
. To install the replacement DIMM module,
align it with the DIMM slot. Next, gently push the new module into the DIMM
socket. The white clips on either side of the DIMM socket will automatically
close and lock the new DIMM module into place. (See
Figure 5-1
)
Figure 5-1: Remove the DIMM Module
Step 6.
Insert the new DIMM module
. Once the old DIMM module has been
removed the replacement DIMM module can be installed. To install the
replacement DIMM module align it with the DIMM slot. Next, gently push the
new DIMM module into the DIMM socket. The white clips on either side of
the DIMM socket will automatically close and lock the new DIMM module
into place. (See
Figure 5-2
)
Figure 5-2: Install a DIMM Module
