Chapter 2: Installation
Installation Overview
2-1
Chapter 2
Installation
2.1. Installation Overview
CAUTION:
Please note that the installation instructions described in this manual should be
carefully followed. Failure do to so may result in damage to the system.
2.2. Installation Prerequisites
1.
Static- free installation environment:
The SR controller must be installed in a static
free environment to minimize the possibility of electrostatic discharge (ESD)
damage. (See
Section 2.3.2
).
2.
Component check:
Before the SR controller is installed, you should confirm that you
have received all the components on the Unpacking List during the unpacking
process. (See
Section 2.5
)
3.
Memory modules:
Modules must be separately purchased and installed. (See
Section
2.7
)
4.
Hard drives:
SCSI-320 hard drives must be purchased separately prior to installation
of the SR controller.
5.
Cabling:
All the SCSI cables that are used to connect the SR controller to the host
and drives must be purchased separately. (See
Section 4.2.1
)
2.3. Safety Precautions
2.3.1 General
Considerations
♦
Power source:
Make sure the power source is within the correct power range prior to
powering on.
♦
Earth
: Always make sure the controller has a safe electrical earth connection via the
power cords or chassis ground on the rack/cabinet.
♦
Ventilation:
Be sure that the rack cabinet provides sufficient ventilation channels
and airflow circulation throughout the enclosure in which the SR controller is
installed.
