Infortrend DS 3012U Hardware Manual Download

Page: 21 / 100

1-8

Chapter 1: Product introduction

1.3.2 Drive tray bezel

The drive tray bezel is designed to accommodate both SAS and SATA-interfaced hard disk drives. Get

familiarized of the components of your system’s drive tray bezel.

Number

Part

Description

Rotary bezel lock This bezel lock secures the drive tray to the chassis .

Release button

This button dislodges the drive trays from the chassis.

Drive busy LED

This LED provides the status of the hard disk drive.

Power status

LED

This LED provides the power status of the hard disk drive.

WARNING!

Be careful not to drop or put heavy objects on the drive tray, as these may cause to bend or

deform the drive tray’s structure. If the drive tray is deformed, it may not fit into the system’s drive bay.

2.5-inch drive tray

3.5-inch drive tray

Summary of Contents for DS 3012U





































































































Search results

Summary of Contents for DS 3012U

Reviews:

Related manuals for DS 3012U

Brands by name

Popular brands

Infortrend DS 3012U, Hardware Manual

Search results

Summary of Contents for DS 3012U

Reviews:

Related manuals for DS 3012U

Brands by name

Popular brands