Fig. S
Fig. T
6.
At the front of the heater, gently remove the wire guard by prizing it away from its locating
holes at each end of the heater case (Fig. S).
7.
Remove the screw from the side reflector (Fig. T) and lift the side reflector up and away
from the heater. Repeat at the opposite end to remove other side reflector.
8.
The emitter wires should be pulled out of the side slots (Fig. U) and the emitter can be
lifted up completely. The wires can then be gently pulled forward so that they come out from
behind the reflector.
SCREW
Fig. U
5.
Pull the emitter wires one at a time through the plate to remove as shown in Fig. R.
Fig. Q
Fig. R
FIXING SCREWS
14
