C H A I N H A N G I N G -
T H R E E S I N G L E H E AT E R S J O I N E D
1. Please refer to Table 1 for recommended positioning of the heater. When hanging four
chains of equal length and gauge are required and should be selected with fixings that
are adequate to hold the weight of the heater assembly. If in doubt contact a
professional for advice!
2. Attach the heater assembly to the chains via the hole in the centre of the joining bars as
shown in Fig. M. and ensure the heater assembly faces directly down when hanging.
3. Secure the supply cables so they do not rest on the body or obstruct the air-vents.
Fig. M
S
E
E
T
A
B
L
E
1
F
O
R
M
IN
IM
U
M
D
IM
E
N
S
IO
N
S
Observe the minimum safe distance between the heater body and inflammable surfaces
and objects when mounting.
Please refer to Table 1 for the recommended positioning of the heater with regards to
minimum distances. Do not install the heater in a corner!
Keep out of the reach of children.
Always isolate the heater from the mains supply when adjusting the position.
12
C A U T I O N
C A U T I O N
C A U T I O N
C A U T I O N
Switch off/unplug the heater from the mains supply when mounting or adjusting the
heater position.
