SYS644X-XX-P1 User Guide
SYSTEM SETUP AND USAGE
001703 Rev. A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
14
Confidential and Proprietary
– Inforce Computing, Inc.
Provided under NDA
2.2 HARDWARE OPERATION
2.2.1 BOOT CONFIGURATION
Boot Configuration can be done by selecting the switch (SW501) provided on the carrier board.
Table 7: Boot selection
CONFIG_1
(Position-2)
CONFIG_0
(Position-1)
Function
0
0
EMERGENCY BOOT (SDC3 FOLLOWED BY USB HS)
0
1
SDC3 FOLLOWED BY SDC1 (eMMC)
1
0
SDC3 FOLLOWED BY SDC2 (Invalid)
1
1
SDC1 (eMMC) DEFAULT
Fast and secure boot selection
CONFIG_6
(Position-3)
Function
0
SECURITY BOOT
1
FAST BOOT
Figure 7: Boot selection switch
Turn ON the system
1.
Adjust the boot selection switch for appropriate boot selection
2.
Connect either DC adapter or ATX power connector and power ON
3.
Quickly press and release the push button (S505)
4.
Check the LED status
Turn OFF the system
1.
Hold the button (S505) for more than 2 second for turn off the system
Resetting the system
1.
Quick press and release of the push button (S505) will reset the systems when system runs