SYS644X-XX-P1 User Guide
SCOPE
001703 Rev. A
MAY CONTAIN U.S. AND INTERNATIONAL EXPORT CONTROLLED INFORMATION
1
Confidential and Proprietary
– Inforce Computing, Inc.
Provided under NDA
SCOPE
This document describes the system setup and usage of Qualcomm Snapdragon S4 Pro APQ8064
based on system SYS644X which includes both carrier and Q7 module.
Development Device Notice
This development device contains RF/digital hardware and software intended for engineering
development, engineering evaluation, or demonstration purposes only and is intended for use in a
controlled environment. This device is not being placed on the market, leased or sold for use in a
residential environment or for use by the general public as an end user device.
This development device is not intended to meet the requirements of a commercially available consumer
device including those requirements specified in the European Union directives applicable for Radio
devices being placed on the market, FCC equipment authorization rules or other regulations pertaining to
consumer devices being placed on the market for use by the general public.
This development device may only be used in a controlled user environment where operators have
obtained the necessary regulatory approvals for experimentation using a radio device and have
appropriate technical training. The device may not be used by members of the general population or other
individuals that have not been instructed on methods for conducting controlled experiments and taking
necessary precautions for preventing harmful interference and minimizing RF exposure risks. Additional
RF exposure information can be found on the FCC website at
http://www.fcc.gov/oet/rfsafety/
Anti-Static Handling Procedures
Development Kit has exposed PCB and chips. Accordingly, proper anti-static precautions should be
employed when handling the kit, including:
Use a grounded anti-static mat
Use a grounded wrist or foot strap
Hardware Identification Labels
Labels are present on the CPU board and the mini-ITX form-factor carrier board. The following
information is conveyed on these two boards:
CPU board:
Serial Number
Mini-ITX form-factor carrier board:
Serial Number
Ethernet MAC address