Installation Instructions
SP-WALLKIT-01
Visit the InFocus support site at www.infocus.com/support
13
Figure 27
(bottom view)
cable (example)
4
4
projector
4.
Route projector cable(s) under mount cover and through
short throw projector arm tunnel. (See Figure 27)
5.
(Optional)Cables can be tied to inside of projector’s front
cover using cable ties (not included). Route cables near
front cover and wrap cable tie through slots on front cover
and around cables. (See Figure 28)
Figure 28
6.
Replace removed cable management covers (if necessary).
Insert one side of cover into groove and press down firmly
on the cover on the other side until it snaps into the other
groove. (See Figure 29)
Figure 29
around cables
cable tie (not included)
route through slots and
4
4
