SP7205 Service Manual
47
Top Case
The
top case
covers the top half of the half of the projector. Once you remove the top case, you have
access to FRUs inside the projector. When you replace the top case, you need to adhere a new
nameplate
to the top case. Once you remove the top case, you also have access to the
elevator button
.
A new top case contains two speakers. You cannot remove the speakers from the top case.
1
Remove the following items:
Rear bezel (page 42)
Outer handle (page 37)
2
Place the projector right side up on the bench, and then remove the two black M3x8 Torx screws
from the bottom case.
3
Slowly lift the top case away from the projector. Avoid stress on the cables that run between the
top case and controller ECA.