SP7205 Service Manual
30
Front IR Receiver and cable
The front IR receiver and cable is located behind the front IR lens in the inner handle. It consists of the IR
ECA and a cable that connects to the controller ECA. The receiver works with others at the rear and both
sides of the projector to provide omni-directional reception of commands from the remote control.
1
Remove the following items:
Outer handle (page 37)
Rear bezel (page 42)
Top case (page 47)
2
Unplug the front IR receiver cable it from J500 on the controller ECA.
3
Slide the front IR receiver upward and out of the alignment slots in the inner handle.
Assembly Notes
•
Route the cable to the left of the front IR receiver ECA and through the saddle at the top of the
inner handle.
•
Make sure that the front IR receiver ECA properly engages the alignment slots in the inner
handle.
•
Connect the cable to J500 on the controller ECA.
