iNFinuvo QQ200 Series User Manual Download Page 5

Function of each button

:

Timer

 button: change cleaning time in 10 min. increment from 10 minutes 

to

 

80 minutes. 

Start/Stop

 button: start or stop the vacuum operation.

Direction

 buttons: direct the vacuum to move in different directions (left, right, 

forward or backward).

EDGE

 button: let the vacuum start cleaning along the wall or around furniture. 

SPOT 

button: let the vacuum perform SPOT cleaning.

UV 

button: turn the UV light on or off. 

Forward

Left

Backward

Clean Along Wall

Ultraviolet Light

Set 

Clean

 Time

Right

   Spot Cleaning

9

Please see below for the functions of 3 control buttons and 4 LED indicators on control 

and display panel.

Power button:

 Press this button to turn the vacuum power On or Off.

Start/Stop button:

 Press this button to start or stop vacuum operation. 

Timer button:

 Press this button

 to

 change cleaning time in 10 min

ute

 increment

s

 from 

10 

minutes

 

to

 80 

minutes

 The default setting of cleaning time is 80 

minutes

 Cleaning 

time setting is displayed in the middle of control panel. 

UV indicator (yellow):

 light on means UV lamp is on. UV lamp is turned on 

automatically once vacuum starts moving on the floor. UV light can be turned off with 
remote control.

ERROR indicator (red):

 light on means the vacuum has

 one of the

 following error

s

battery is over-heating; vacuum motor is overloading; vacuum is lifted off ground for 
longer 3 seconds.

 For 

more 

details

,

 refer to page 23.

POWER/CHARGE indicator (blue): 

This is a dual function indicator. 

After the vacuum is powered up, it shows a solid blue light. 
When battery is being charged, it will be flashing until the battery is fully charged. 
Normal charging time is about 3~3.5 hours.

LOW BATT

ERY

 indicator (red):

 light on means battery power is low. 

Clean Time

Error Indicato

r

Low Battery Indicator

S

et Cleaning Time

8

Control Panel

Remote Control Functions

You can use remote control to control vacuum operations including start/stop the 
vacuum, direct its movements, change running time setting, turn UV lamp on/off, 
select SPOT cleaning mode, or let vacuum clean in wall/edge following pattern. The 
remote control is powered by 2 AAA batteries (included), and its working range is 
about 9 ~10 ft.

S

tart/S

S

top Button

 

P

ower On/Off Button

Ultraviolet On 

Indicator

Power On 

& Charging

 

Indicator

  

Summary of Contents for QQ200 Series














Reviews: