iNFinuvo QQ200 Series User Manual Download Page 11

Tip#2

14 in

Adjust the distance between furniture, walls and other objects to be
at least 36 cm (14 in). 

Tip#1:  Clear the area 

and remove

 any items

 that can be easily knocked 

over or caught in the Roller Brush or Side Brush.

In the area where the CleanMate operates,
it might knock over items such as vases, 
glasses, or lamps.

In order to provide the CleanMate a 
space for fast and safe cleaning, 
please remove small items from the 
area before operating.

Tip#3 

Do not let the loose edges of  rugs, drapes, table cloths, etc  to get caught 
in the CleanMate. Roll under the loose edges of rugs and make  sure that 
any table cloths, drapes, bedding etc do not hang down to the floor. 

When the CleanMate is cleaning 
rugs, fold under the edges of the 
rug.

Remove plastic bags and leftover long-
shaped garbage 

Fixing jams: Objects can get caught in the Roller Brush 
and prevent it from working properly. Immediately turn the 
unit off, clear the object causing the jam, and resume 
normal use.

Tip#4

When something is 
jammed inside the 
CleanMate, 

i

t will emit a 

beeping sound.

 Turn the Power

 

switch

of

 

the

 

unit

 

to

 

OFF.

Turn the CleanMate 
upside-down, and 
remove the objects.

Clean the vacuum 
entry.

Tip#5

Block areas where the CleanMate could get stuck by placing 
objects in the way so that the CleanMate does not go into these 
areas.   

The space under some furniture may 
not be high enough for the 
CleanMate to get underneath.

Use a potted plant to block the 

CleanMate 

and prevent it from going these places.

Sensor

Tip#6

Aim the remote control at the sensor on the front of the CleanMate. 
Anything blocking the  signal will affect the  performance of the remote 
control.

20

21

Useful Tips

Useful Tips

Summary of Contents for QQ200 Series














Reviews: