36cm
21
Cleaning the Rolling Brush
Hair and other stringy items can get caught in the rolling brush over time.
1.Make sure the power to the unit is turned off.
2.Turn the QQ-2 Plus upside-down and place it on a flat surface with the back
of the unit facing you.
3.Remove the Rolling Brush from its compartment by grasping the left side of the
Rolling Brush, and sliding it toward the right.
4.Lift the free end of the Rolling Brush out of the compartment, then slide the
Rolling Brush to the left, freeing it from the flexible insert.
5.Manually remove any hair, string or other objects from the rolling brush to
ensure proper performance of the unit.
6.With the Rolling Brush removed, loosen any dirt that has accumulated in the
Rolling Brush compartment with a brush, then dump the dirt into a trash can.
7.Re-install the rolling brush following the steps outlined in Rolling Brush
Installation and Removal
Useful Tips
Clear the area where the QQ-2 Plus is to clean of any items can
be easily knocked over or caught in the Rolling or Side Brushes.
In the area where the QQ-2 Plus operates,
it might knock over items such as vases,
glasses, or lamps.
In order to provide the QQ-2 Plus a
space for fast and safe cleaning, please
remove small items from the area
before operating.
Do not let the loose edges of rugs, drapes, table cloths, etc to get caught in the
QQ-2 Plus. Roll under the loose edges of rugs and make sure that any table
cloths, drapes, bedding etc do not hang down to the floor.
When the QQ-2 Plus is cleaning
rugs, fold under the edges of the rug.
Remove plastic bags and leftover long-
shaped garbage
Adjust the distance between furniture, walls and other objects to
beat least 36 cm (14 in).
QQ2 Plus Series
QQ2 Plus Series
