Infinova V1492N-18N05, Operation Manual

Page: 23 / 40

17
5.13 Bit Rate
Click the “Bit Rate” button in the navigation bar to display the
following interface:
Figure 5-13
There are 2 modes of bit rate: variable rate (vbr) and fixed rate (cbr).
The variable rate can adjust the bandwidth that it occupies
automatically according to the complexity of image, because the
complexity of real video sequence keeps changing, details, speed,
etc, and the variable rate setting mode can be used to choose how
much bandwidth should be used. If the video gets more details and
moving fast, then it takes up more bandwidth to transmit, and
reversely it occupies less bandwidth. When the setting goes with
fixed bit rate, then the image is transmitted under a fixed
bandwidth.
The above instruction is for
stream type as “Major Stream”. If setting as
“Minor Stream”, the options of bite rate will be different.
1RWH
Only the super user can set this option.
5.14 Audio
Click “Audio” button, and Audio setting interface will be shown as
follows:
Figure 5-14
V1492N-N series IP PTZ camera features bi-directional voice
function.
,Q
indicates sound comes from the PC and then is outputted from
the front-end camera. If you want to obtain audio input function,
select “on” in the scroll field of In and click “Set” to save it.
2XW
indicates sound comes from the camera audio port, then
outputted from the PC. If you want to obtain audio output function,
select “on” in the scroll field of Out and click “Set” to save it.
$XGLR6DP SOH5DWH
: 8K/44K optional. At present, for Infinova
Player, 8K and 44K are available; for QuickTime Player, only 8K
is available.
Take setting for Infinova player as example:
1. Connect an input device like a microphone to V1492N-N and
connect an output device like a sound box to PC. Open DM365 IP
PTZ camera web page and set “out” to “on”, the sound will be sent
from site to console. Real-time surveillance will be performed.
2. Connect an output device like a sound box to V1492N-N and
connect an input device like a microphone to PC. Open DM365 IP
PTZ camera web page and set “in” to “on”, the sound will be sent
from console to site. Real-time surveillance will be performed.
1RWH
When QuickTime Player activated, sample rate set to 8K
along with both In and Out set to off, audio output is available
automatically.
5.15 Snapshot
Click “Snapshot” button in the navigation bar to display the
following interface:
Figure 5-15
Pathname: set the image storage location. Default path is “C:\”.
Click the pathname frame and you can select your desired path in
the prompt show as below:
Figure 5-16
If clicking “Shot”, the desired image will be captured and saved to
the desired path.
1RWH
the image is saved with its name including IP address and
time information.
Take the image named 20071114_191026_734_01
_192.168.3.119.jpeg as an example, it shows the IP address of
snapshot pan/tilt is 192.168.3.119, and the shoot time is at
19:10:26:734 Nov.14, 2007.