4
2.2 Desktop Mount
The desktop mount is chiefly suitable for the places in which there
are various kinds of desk, rooftop, balcony, etc, and according to
the vertical rotation range of PTZ camera from -90
e
to 40
e
for the
sake of its mechanism structure, the PTZ camera has to be mounted
at the edge of desktop. Thus, something related to the intensity and
other factors of the desktop has to be taken into consideration. In
the process of mounting, there has to be a few holes to be drilled in
a proper distance from the edge of desktop, and then fix the PTZ
camera adapter there by using expansion bolts. Confirm whether it
is firm enough, then mount the PTZ camera and finish the whole
mounting. Users can select the suitable way how the cable is pulled
out according to their need. Below figures demonstrate the way
how the cable is dragged out.
Desktop Mount Structure
Cable dragged out from the side
(Mainly used when there is not enough room below the desktop)
Cable dragged out from the base
(Mainly used when there is enough room below the desktop)
2.3 Wall Mount
Wall mount is to fix the PTZ camera on the erect or slanting plane
by means of some specific auxiliary mounting components, and
before mounting, these wall mount brackets have to be fixed on
wall or other erect planes. After it is fastened steadily, just mount
the PTZ camera on the bracket to complete the mounting. Shown as
below:
Wall Mount Bracket Structure
Cable hole,
as referenced
size, actual size depends on
construction needs.
M8 or same type
eyelet bolts (British
measurement )
40
Cable dragged out from the side
Wall Mount Bracket Structure
Cable hole,
Ø40.0
as referenced
size, actual size depends on
construction needs.
M8 or same type
eyelet bolts (British
measurement )
Ø40.0
108.0
127
.0
4-Ø8.0
Cable dragged out from the base
2.4 Pole Mount
Pole side mount is to install the PTZ camera to the cylinder via
linkage components. It is necessary to fix a connection board to the
cylinder via a hoop before installing. Then, install the wall mount
brackets to the connection board. After it is fastened steadily, just
mount the PTZ camera on the wall bracket to complete the
mounting.
Cable from the side
Cable dragged out from the base
Summary of Contents for V1492N-18N05
Page 2: ......
Page 6: ......
Page 40: ...Infinova 6WRXWV DQH 0RQPRXWK XQFWLRQ 1 8 6 7HO 86 RQO D VDOHV LQILQRYD FRP V1 4 1208...
