Infinova V1492N-18N05, Operation Manual

Page: 19 / 40

13
Figure 4-30
Click “Browse” button above, then select program update in the
pop-up dialog box. After that, click “Upload” button, the system
begins to update.
If update successfully, the following information will appear on the
current interface:
Figure 4-31
If the type of updating file is wrong, the following information will
come out:
Figure 4-32
At this time, re-check the updating file and camera system, or
otherwise choose other program to update.
1RWH
After update successfully, it needs to restart the system.
)DFWRU\6HWWLQJV
Figure 4-33
Click “Set” button, the following hint would display:
Figure 4-34
Click “OK”, system starts to reset to the factory default. It takes
about 15 seconds to undertake this process, when finishing, the
figure below would appear:
Figure 4-35
Click “OK” button to close the webpage.
1RWH
When factory setting is finished, IP address resumes to
192.168.1.100, while subnet code resumes to 255.255.255.0.
2QOLQH5HERRW
Figure 4-36
Click “Reboot”, the system will be automatically re-started. And
after 80 seconds the webpage closes.