Infinova V1492 Series, Operation And Programming Manual

Page: 26 / 44

20
TOUR NO: 001 ~ 006
PAGE: Page up or page down.
TIME: 000 ~ 060s
HOME POSITION
RETURN TIME
RETURN
: NONE
: 000
SET TOUR
RETURN
TOUR NO.:001 PAGE1
ACT TIME
1: NONE 000
2: NONE 000
3: NONE 000
4: NONE 000
5: NONE 000
6: NONE 000
7: NONE 000
8: NONE 000
RETURN
TOUR NO.:001 PAGE2
ACT TIME
9: NONE 000
10: NONE 000
11: NONE 000
12: NONE 000
13: NONE 000
14: NONE 000
15: NONE 000
16: NONE 000
Note: 97+SHOT (OPERATE) is to call current edited TOUR.
6.8 Control Set
WIPER : OFF
RETURN
DEFROSTER : OFF
SET CAMERA ID
CAMERA SETUP
SET AE MODE
OSD SETUP
AUTOPAN SET
PATTERN SET
AREA SET
DEFAULT SET
EXIT
HOME RETURN
CONTROL SET
WIPER (Wiper Setup)
Function: To turn on or off the Wiper
Option: ON- Turn on the Wiper
OFF- Turn off the Wiper
Note: If choose ON, the wiper will be working unceasingly, which
cannot be interrupted by any operation except for setting to OFF.
DEFROSTER (Defrost)
Function:
To set up the Defroster
Option:
ON- Turn on the Defroster
AUTO-The defroster is thermostatically controlled, it
will turn on in low temperature, and turn off in high
temperature.
6.9 Autopan Set
PTZ camera could scan between two boundary lines and so the PTZ
camera could monitor some area continuously under system
automatic running state.
AUTOPAN parameters could be set in AUTOPAN SET menu.
SET CAMERA ID
CAMERA SETUP
SET AE MODE
OSD SETUP
AUTOPAN SET
PATTERN SET
AREA SET
DEFAULT SET
EXIT
HOME RETURN
CONTROL SET
AUTOPAN SET
DIRECTION : RIGHT
SPEED :
008
TIME : 000
TITLE :
RETURN
AUTOPAN: 001
DIRECTION
Functions:
Set the original orientation when PTZ camera do
horizontal running.
Options:
RIGHT & LEFT
RIGHT (default): Start pointing that camera aims at and
runs to the right.
LEFT: Start pointing that camera aims at and runs to the
left.
SPEED
Functions:
Select the scanning speed.
Options:
001~022. The smaller the digit is, the faster the speed will
be. Default is 008.
TIME
Functions:
Set the period when PTZ camera stays on the left &
right boundaries.
Options:
000~030 (s). The default is 000.
TITLE
Functions:
Define AUTOPAN route (no more than 16 characters).
Display could show or conceal the title. If the set is ON,
the title will show on display when scanning.
Options:
62 characters could be applied in total when define the
title. 52 English letters in upper and lower cases and 0-9
Arabic numerals are available. Spaces are allowed in
title.
Steps:
1. Move the cursor to the first entry of the TITLE item;
2. Deflect the joystick downward (or upward) to select a suitable
character (or a space);
3. Move the cursor to the next entry;
4. Repeat Steps 2 through 3 until the whole title has been edited.
Example:
DIRECTION :
SPEED :
TIME :
TITLE :
RETURN
RIGHT
010
002
Gate to Elevator
A
B
C
D
AUTOPAN SET
AUTOPAN 001
Above menu will show after enabling AUTOPAN function:
Camera will go to boundary A automatically and run to right
˄
A
˅
to scan at the speed of 10 grade
˄
B
˅
.
When camera moves to another boundary, stays 2s
˄
C
˅
, return to