Infinity 800 HD UBL, Instruction For User, Installation & Servicing

Page: 40 / 60

P a g e | 38
LT 7941 Issue No 3 (04/22)
800 HD with UBL INSTALLATION INSTRUCTIONS
Advise The Customer.
The glass front of this fire acts as a dress guard conforming to BS 1945 (1997) and satisfies the
heating appliance regulations (1991) however; a fireguard conforming to BS6539 (1997) must be
used to protect young children, the elderly, or infirm.
During initial “burn off”, an odour may be evident during the first few hours of use. This is due to
the surface coating on the metal work “burning off”. The odour produced is harmless and will
disappear after a short period of time.
Any debris should be cleared from the appliance.
The appliance should be serviced annually by a Gas Safe registered engineer in accordance
with the Service instruction section.
Point out the position of the power source for the appliance, plus demonstrate using the
additional battery holder and adaptor lead, the battery backup
option. (“C” cell batteries not
included within this appliance).
Demonstrate the lighting and extinguishing procedures to the user and the removal and refit of
the glass panel for cleaning and the fitting of the battery backup kit.
Hand these instruction over to the user along with the battery holder, adaptor lead plus M4 nut
spinner for the removal of the glass panel.
Please be aware that the non-reflective glass may in some lights and from some angles have a
blue tinge to it this is perfectly normal.
It is a requirement that the gas fire is installed and commissioned to the manufacturer’s
instructions and the data fields on the commissioning checklist completed in full located at the
back of the book.