background image

 

P a g e

 | 

1

 

 

LT 7941 Issue No 3 (04/22) 

 

Benchmark Scheme 

 

 

Charlton and Jenrick Ltd is a licensed member of the Benchmark Scheme which aims to 
improve the standards of installation and commissioning of domestic heating and hot 
water systems in the UK and to encourage regular servicing to optimise safety, efficiency 
and performance. Benchmark is managed and promoted by the Heating and Hotwater 
Industry Council. For more information and the full code of practice please visit 

www.centralheating.co.uk

 

 

Please ensure that the installer has fully completed the Benchmark Checklist on the inside 
back pages of the installation instructions supplied with the product and that you have 
signed it to say that you have received a full and clear explanation of its operation. The 
installer is legally required to complete a commissioning checklist as a means of 
complying with the appropriate Building Regulations (England and Wales). 
 

All installations must be notified to Local Area Building Control either directly or through a 
Competent Persons Scheme. A Building Regulations Compliance Certificate will then be 
issued to the customer who should, on receipt, write the Notification Number on the 
Benchmark Checklist. 
 

This product should be serviced regularly to optimize its safety, efficiency and 
performance. The service engineer should complete the relevant Service Record on the 
Benchmark Checklist after each service. 

The Benchmark Checklist will be required in the event of any warranty. 

 

It is a requirement that the gas fire is installed and commissioned to the manufacturer’s 

instructions and the data fields on the commissioning checklist completed in full. 

To instigate the guarantee, the gas fire needs to be registered with the manufacturer 
within one month of the installation. 

To maintain the guarantee, it is essential that the gas fire is serviced annually by a Gas 
Safe registered engineer. The service details should be recorded on the Benchmark 
Service Interval Record and left with the householder. 

800 HD with UBL USERS INSTRUCTIONS 

Summary of Contents for 800 HD UBL





























































Reviews: