Infinity 800 HD UBL, Instruction For User, Installation & Servicing

Page: 36 / 60

P a g e | 34
LT 7941 Issue No 3 (04/22)
800 HD with UBL INSTALLATION INSTRUCTIONS
Hole in the wall .
For hole in the wall installation, two additional fixing brackets will be needed that are attached
to the fireplace frame LH and RH. Attached the two brackets using the 6 off fixing screws
provided with the kit. Secure the complete assembly using suitable rawl plugs and wood screws
via two 6mm holes within the wall fixing brackets. (Please see Figure 7).
(Please Note) . The fireplace frame is supplied with
the slip guides attached. To improve the overall
appearance of the appliance the guide brackets
can be detached by removing the No 6 shelf
tapping screws from within the fireplace frame
assembly.
Hole in the wall fixing brackets.
Attach to the frame assembly using
the six self-tapping screws provided
6mm fixing holes
Keyhole slot must be fully engaged to maintain
the 10mm clearance between the glass fixing
bracket and the bottom internal edge of the
fireplace frame
Important
When fitting the fireplace frame the studs need
to be fully engaged to the top of the keyhole
slot (as shown). If this is not fully engaged, it
may cause ignition and outing issues