BSC-50D User Guide
18
4.10 Managing Status Messages
4.10.1 Status Message Period
0650,p
0650: Command
ID
p:
0-2376, Period [hours], Value ‘0’ disables status messaging, Default: 168
Scope: LP-MCU, COMM_MCU
4.10.2 Signal Quality measurements
A Status Message can contain additional information concerning the Signal Quality:
068x
068x: Command ID, 0680 for including, 0681 for excluding Signal Quality
measurements
Scope: COMM_MCU
4.10.3 Status Message Idle Period
0651,t
0651: Command
ID
t:
0-180, Period [sec], Default: 120
Scope: COMM_MCU
Use this parameter to set an idle time period after the Status Message Transmission.
The GMS Modem will remain connected to the GSM Provider network for this Period,
waiting for receipt of SMS containing Configuration or Verification commands.
4.11 Transmission parameters
4.11.1 Transmission Retries
This setting represents the number of retries after a SMS transmission failure. A
transmission session has a duration of maximal 2 minutes. The LP-MCU powers
down the COMM_MCU after exceeding this Period. The COMM_MCU undertakes
several retries during a transmission session. The retries parameter represents the
number of transmission sessions established by the LP-MCU in case of a persisting
transmission failure.
The value of this parameter can strongly affect the Battery
Life, commonly on sites with coverage limitations.
0640,n
0640: Command
ID
n:
0-99, Send Retries, Default: 3
Scope: LP-MCU
4.11.2 Delay between Retries
0641,d
0641: Command
ID
d:
0-65535, Delay between Retries [sec], Default: 10
Scope: LP-MCU
