background image

15

User Manual — Linea Pro Rugged for iPod touch

Disclaimer

NO WARRANTY. This technical documentation is 

provided AS-IS. Further, the documentation does 

not represent a commitment on the part of. Infinite 

Peripherals, Inc does not warrant that it is accurate, 

complete or error free. Any use of the technical 

documentation is at the risk of the user. Infinite 

Peripherals, Inc reserves the right to make changes 

in specifications and other information contained in 

this document without prior notice, and the reader 

should in all cases consult Infinite Peripherals, Inc 

to determine whether any such changes have been 

made.  Infinite Peripherals, Inc shall not be liable for 

technical or editorial errors or omissions contained 

herein; nor for incidental or consequential damages 

resulting from the furnishing, performance, or use 

of this material. Infinite Peripherals, Inc does not 

assume any product liability arising out of or in 

connection with the application or use of any product 

or application described herein.

Federal Communications Commission

Federal Communications Commission (FCC) Statement
 
15.21
You are cautioned that changes or modifications not expressly approved by the 
part responsible for compliance could void the user’s authority to operate the 
equipment.
 
15.105(b)
This equipment has been tested and found to comply with the limits for a Class 
B digital device, pursuant to part 15 of the FCC rules. These limits are designed 
to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the following 
measures:

◊ 

Reorient or relocate the receiving antenna.

◊ 

 Increase the separation between the equipment and 

receiver.

◊ 

 Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

◊ 

 Consult the dealer or an experienced radio/TV technician for 

help.

Operation is subject to the following two conditions:

1. 

 This device may not cause interference and

2. 

 This device must accept any interference, including interference that may 

cause undesired operation of the device.

FCC RF Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for 
an uncontrolled environment. End users must follow the specific operating 
instructions for satisfying RF exposure compliance. This transmitter must not be 
co-located or operating in conjunction with any other antenna or transmitter.

Warranty

Infinite Peripherals does not warrant, and is not 

responsible for, any damage to the Linea Pro Rugged 

(“Product”) or the assembled iOS device as a result 

of liquid or solid particle intrusion into the Product, 

or damaged caused by dropping the Product with the 

assembled iOS device. If a material or workmanship 

defect arises with regard to any Infinite Peripherals 

product, and a valid claim is received within the 

Warranty Period, Infinite Peripherals (at our sole 

discretion) will repair the Product using new or 

refurbished parts, or replace the Product with a new 

or refurbished Product. 

 

For purposes of this limited warranty, “refurbished” 

means a product or part that has been substantially 

returned to its original specifications. In the event of a 

defect, these are your exclusive remedies.

Summary of Contents for Linea Pro Rugged
















Reviews: