12
User Manual — Linea Pro Rugged for iPod touch
Scan Barcodes
The scan engine in the Linea Pro Rugged supports one-
dimensional (1D) and two-dimensional (2D) barcode
symbols. The effective reading distance of the barcode
reader varies based on the barcode size. For example, 15-
20 cm (5.9-7.9 inches).
Note
Single scan and multi-scan modes are supported.
1. Press and hold the Scan button on either side of the
unit to activate the Linea Pro Rugged.
2. Position the scan head as close to the barcode label
as possible so the scan line crosses both ends of the
barcode.
3. Slowly pull the unit back, increasing the distance
between the barcode and scan head, until the barcode
is read by the scanner. Data is displayed on the iOS
device.
Turn on the Linea Pro Rugged
Two scan buttons located on each side of the unit are dual purpose, that means either button can turn on the unit or scan
barcodes.
1. With the unit turned off, press one of the scan buttons on either side.
2. Press a scan button a second time to activate the scanner for normal barcode scanner.
Note
If the Linea Pro Rugged is idling for an extended period of time, the power turns off automatically to preserve the charge on the internal
battery pack. When turned off, the unit is in sleep mode immediately.
Reading HF RFID Cards
The optional RFID tag/card reader incorporates several
RFID formats depending on the model of your Linea Pro
Rugged.
1. To activate the reader, press the Scan button.
2. Place a RFID tag/car over the receiver/transmitter as
indicated by the RFID label.
Note
The data is read from the Linea Pro Rugged RFID reader and then
sent to your iOS device.
