![Infineon XENSIV BGT60TR13C User Manual Download Page 45](http://html.mh-extra.com/html/infineon/xensiv-bgt60tr13c/xensiv-bgt60tr13c_user-manual_2055086045.webp)
45 of 59
2022-23-05
User Guide for XENSIV™ K
IT CSK BGT60TR13C
Table of contents
7.1.9
LED
Rapid IoT connect developer kit has 1x RED user LED for general-
purpose applications. The series resistor is 330Ω
for limiting the current. The User LED is configured in active low mode and connected to pin
P11_1 of the PSoC™
6 MCU device.
Figure 43
User LED
7.1.10
User button
The User button is used for general-purpose applications, and is connected to pin P0_4
of the PSoC™ 6 MCU
device. It is configured in active low configuration by default. It is tied to the VBACKUP power rail through a 10K
pull-up resistor (R9).
Figure 44
User button
7.1.11
ECO
The board has one crystal connected to the
PSoC™
6 MCU device: 17.2032-MHz ECO for audio applications. ECO
pins ECO_IN and ECO_OUT are connected to the P12_6 and P12_7 pins of PSoC™ 6 MCU respectively.
Figure 45
ECO crystal