TLE9461-3ES / TLE9471-3ES Evaluation Board
Getting Started
TLE9461-3ES / TLE9471-3ES Evaluation Board
12
Rev 1.0, Dec 2018
6.5.
CAN connector
The connector for CANH and CANL is X23. The CAN terminations are fixed.
Figure 7: Jumper for the CAN terminations
For proper termination of the CAN bus, two 62
Ω resistors are connected in series, differentially between CANH
and CANL. In addition, there is a 4.7nF capacitor supporting bus-symmetry during data-transmission.
Figure 8: CAN termination
In case, a Common Mode Choke (CMC) is considered to further improve electromagnetic compatibility /
immunity, a landing pattern is designated, either using R19 and R26 or replacing it with the CMC.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
