TLE9461-3ES / TLE9471-3ES Evaluation Board
Getting Started
TLE9461-3ES / TLE9471-3ES Evaluation Board
6
Rev 1.0, Dec 2018
6.
Jumper Configurations
6.1.
Power Supply Configuration
The SBC can be supplied with VBAT (typical use case) or through the 12V provided by the uIO (if plugged in
and connected to a USB port). This can be configured with the jumper X10, located close to the reset button:
Figure 3: Jumper to configure the SBC´s power supply
The possible configurations are as follows:
X10
SBC supplied through Vbat (12 V)
Connect VBAT
SBC supplied through uIO (12 V)
Connect VSUP and VS_UIO
Table 2: X10 Cofiguration
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
