TLE9461-3ES / TLE9471-3ES Evaluation Board
Getting Started
TLE9461-3ES / TLE9471-3ES Evaluation Board
9
Rev 1.0, Dec 2018
6.4.
Configuration of the WK/VSENSE and FO/GPIO pins
These jumpers are located at the top right corner of the board:
Figure 6: Jumpers related to the WK/VSENSE and FO/GPIO pins
The possible configurations are shown in the following table. Note, that these are the only possible configurations
due to the fact that functionalities are multiplexed:
X26:
FAIL OUTPUT
X16:
WAKE SOURCE
X17:
WAKE / VSENSE
SELECT
X19:
FO/GPIO LED
V
s
Sense
Connect Pin 2+3
Open
Connect Pin 2+3
Open
Cyclic Sense
Open
Connect Pin 2+3
Connect Pin 1+2
Open
Regular wake up
(wake up through
wake up button)
Open
Connect Pin 1+2
Connect Pin 1+2
Open
GPIO as HS (LED
D7 as load)
Open
Open
Open
Closed
FO (LED D8)
Connect Pin 1+2
Open
Open
Open
Regular wake up
and FO
Connect Pin 1+2
Connect Pin 1+2
Connect Pin 1+2
Open
Regular wake up
and GPIO as HS
Open
Connect Pin 1+2
Connect Pin 1+2
Closed
Table 5: Configurations related to the WK/VSENSE and FO/GPIO pins
1
2
3
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
