User Guide
21 of 44
Revision 1.1
2021-03-21
EVAL-M3-302F User Guide
iMOTION™ Modular Application Design Kit
Getting started with EVAL-M3-302F
Table 13
MCEWizard setup overview table
Parameter
Value
Comment
Power board selecting
MADK power board name
If no, select similar power board
to modify
Motor 1 shunt configuration
Refer to the power board App Note
Controller supply voltage
Refer to the power board App Note
VDD is 3.3 V by default
Max DC bus voltage
Refer to the power board App Note
DC bus sensing high resistor
Refer to the power board App Note
DC bus sensing low resistor
13.3 kOhm
NTC temperature shutdown
value
Calculated as in Section 6.3.2
Refer to the power board App
Note
GateSense Low-Side devices
Refer to the power board App Note
High is true by default
GateSense High-Side devices
Refer to the power board App Note
High is true by default
Motor 1 current input
Calculated as in Section 0
PFC topology
Refer to the power board App Note
Boost or totem-pole
PFC current input
Calculated as in Section 6.2.2
PFC gate driver polarity high
side
Refer to the power board App Note
High is true by default
PFC gate driver polarity low
side
Refer to the power board App Note
High is true by default
After all the MCEWizard questions are answered, the “Verify & Save Page” will be shown as in Figure 8.
Figure 8
Verify and Save page for MCEWizard
Click “Calculate” button and “Export to Designer File (.txt)” button to save the parameter file that will be used
by the MCEDesigner in the next steps.
