Inficon 551-010, Operating Instruction

Page: 24 / 56

24
Operating the remote control
5 Operating the remote control
5.1 Starting up the
RC1000
After starting up, a start screen with a „Welcome“ message is
shown on the touch display.
The RC1000WL remote control searches for a receiver (radio
transmitter) of a leak detector after starting up to connect with
it.
If no devices with which a connection is possible were found
in the area, a message „no data connection“ is displayed.
The establishing of a data connection is described in chapter
5.3.2 .
If a data connection with a leak detector is established the
RC1000 shows the measuring screen on the display
(see
Fig. 8 ).
Fig. 7 Touch-Display of the RC1000