Inficon 551-010, Operating Instruction

Page: 29 / 56

Operating the remote control
29
5.3.2 Connecting / disconnecting
(RC1000WL)
The RC1000WL remote control searches for a receiver (radio
transmitter) of a leak detector after turning on or after
pressing the "Connect" button.
If no connection is found in the area within 20 seconds, the
search is aborted.
The button "Connect" is displayed in the main menu when
there is no connection to a leak detector yet.
After establishing the connection, the function of the button
changes to "Disconnect".
Close an existing connection with "Disconnect"; the main
menu is displayed.
Connecting to a leak detector
• Pressing the “Connect” button of the
main menu starts the search.
• If devices with which a connection is
possible were found in the area, they are
displayed in the list "Connectable
devices".
• Select the desired device and connect to
it by pressing "Connect".
The main menu opens automatically.
• Press "Cancel" to end the connection
process and return to the main menu.
Fig. 11 Display of connectable devices for the connection