Inficon 551-010, Operating Instruction

Page: 23 / 56

Installation
23
Connect the plug of the power supply with the socket of the
RC1000WL
(see Fig. 5 , Pos. 3), to charge the integrated
battery.
The RC1000WL is always switched on while the power
supply cable is connected and the battery is being charged,
the Charging LED is lit.
Short pressing of the „POWER“ button reduces the backlight
intensity, pressing it for a time longer than about 10 s
performs a reset of the remote control.
The LED switches off as soon as the battery has fully
charged.
The battery can be charged during operation.
You can use the enclosed power supply all over the world;
adapt it with the interchangeable blades to the national
design (Europe, North America, Japan, UK, China, Australia,
see also
8.4 ).