Installation
Booster Car Seat
ADJUSTER
ATTACH
PULL TO
TIGHTEN
Tilt
Pull to
Lengthen
Pull to Tighten
Figure 9
Figure 3
Figure 9
Figure 4
WARNING
!
DO NOT USE WITH JUST A LAP BELT.
You must use a lap-sash seat belt.
Installing in Vehicle
CAUTION: CHILDREN CAN BE
INJURED OR RESTRAINTS AND
TOP TETHER STRAP DAMAGED
BY UNSECURED CARGO IN A
COLLISION. SECURE OR
REMOVE HAZARDOUS CARGO
BEFORE USING THIS CHILD
RESTRAINT.
Always secure the loose end of the top
tether strap to prevent it hanging out of
the car or being accessible by the child.
IMPORTANT
!
• Tighten till slack is removed.
• In certain vehicles an extension strap
may be needed.
• Do not overtighten Top Tether strap.
• Ensure Top Tether strap is passed
through the Top Tether Strap Guide.
•
Storage
Pocket
Pull to tighten and remove all the slack, from the
top tether strap (refer to Figure 3).
Do not overtighten as this could cause the
restraint to lift off the vehicle seat.
Roll up the excess webbing from top tether
strap and store in the pocket provided (refer
Figure 4).
Step 4:
Step 5:
Tether Storage
After correctly installing the restraint in your car,
roll up and place any excess tether strap in the
storage pocket provided (refer Figure 4).
12
