Set Up
Adjusting the Headrest
The headrest can be adjusted to different heights,
to best suit your child’s shoulder height. This can
be done with the child in the seat.
Grab the headrest, push or pull to move the headrest
either up or down.
Adjust the headrest height so that the bottom of the
sash guide is located level with or just above the
child’s shoulder.
WARNING
!
DO NOT USE WITH JUST A LAP BELT.
You must use a lap-sash seat belt.
Booster Car Seat
Installation
Installing in Vehicle
Figure 9
Figure 2
Figure 9
Figure 1
Place the child restraint in the car, in a forward
facing seating position (Refer the Figure 1).
Install the upper anchorage fitting as shown
on page 20 & 21 of these instructions.
Hook the attachment clip to the anchor fitting.
Ensure there are no twists in the upper
anchorage strap (Refer to Figure 2).
Step 1:
Step 2:
Step 3:
Step 1:
Step 2:
IMPORTANT
!
For comfort ensure the bottom edges of the
headrest are not contacting the child’s shoulders.
11
