37
ISOFIX Compatible Restraint
Child Car Seat
Installing using flexible ISOFIX Lower Anchorage Connectors (LAC)
Step 1:
Step 2:
Step 3:
Step 4:
Install the restraint
on the vehicle seat
Locate the ISOFIX lower
anchorage points (refer to
Page 35).
Insert the flexible LAC into
the ISOFIX lower anchorage
point.
You may need to ‘PUSH’ into
the seat bite where the
ISOFIX symbols indicate.
Give a ‘PULL’ to check for
positive engagement (refer
Figure 2).
Push down on the restraint
(with knee or hand) whilst
pulling the adjuster strap
firmly. Remove all slack
from the LAC straps by
pulling the adjuster strap
firmly. The
GREEN
indication is activated (refer
Figure 3).
Repeat for both sides of the
restraint.
Installing using flexible ISOFIX Lower Anchorage Connectors (LAC)
Step 1:
Step 2:
Forward facing mode
Fully recline the restraint
Swing the Recline
Section rearward
(refer Figure 1).
PUSH
PUSH
PULL
Figure 3
Figure 2
RECLINE
SECTION
Figure 1
Front
of Car
PUSH
Green
Indicator
REMOVE ALL SLACK
FROM LAC STRAP
