26
Use
Infant Seat
Using in-built harness
IMPORTANT
!
A LOOSE HARNESS IS DANGEROUS.
The Padded Insert/s (if fitted) are designed to
provide extra support and comfort for small
babies. Discontinue use when the insert is a
tight fit or creates discomfort for larger
babies/children.
Always adjust the height of the shoulder straps
as the child grows.
NOTE:
If Top Tether strap has been loosened to allow
easier placing of the baby in the restraint, tighten the
upper anchorage strap so it has no slack in it. DO
NOT TIGHTEN EXCESSIVELY.
Check harness tightness by using 2 fingers at the
child’s shoulders (refer Figure 7).
If required repeat Step 5.
Pull to tighten to remove all the slack, from the
upper anchorage strap. Do not overtighten as
this could cause the restraint to lift off the vehicle
seat (refer to Figure 8).
Store any excess webbing, from the top tether strap,
in the storage pocket provided on the restraint (refer
Figure 9).
Step 6:
Step 7:
Step 8:
Figure 7
Figure 8
Figure 9
Top Tether
Strap
Adjuster
Storage
Top Tether
Strap Guide
Top Tether
Strap
Anchorage
Point
Adjuster
Tilt
Pull to
Lengthen
Pull to Tighten
