20
Place the child restraint on the vehicle seat. Ensure
recline section is swung forward and the restraint is
fully reclined with the restraint directly in line with
anchorage point.
Make sure Top Tether strap is as in illustration
(Figures 1 and 2) i.e. positioned around restraint
back.
Step 1:
Step 2:
DO NOT USE REAR FACING CHILD RESTRAINT WHERE AN AIRBAG IS FITTED IN
FRONT OF THE SEATING POSITION.
Fit the restraint firmly to the car seat.
THIS TETHER STRAP MUST ALWAYS BE FITTED WHEN THE CHILD RESTRAINT IS
USED IN A VEHICLE.
Figure 2
WARNING
!
Buckle
Assembly
Figure 1
Top Tether
Strap
Adjuster
Front
of Car
Installing Using Vehicle Seatbelts
Installation
Infant Seat
Recline Section (Swung Forward)
& child restraint fully reclined.
IMPORTANT
!
REARWARD
FACING
BELT PATH
Feed adult lap or lap/sash belt through the belt path
opening, ensure the seat belt is under the cover &
between the layer of foam and the plastic seat base.
Engage the buckle and tongue assembly (listen for
a
“CLICK”
). Check the buckle engagement with a
gentle pull.
Lap Belt &
Sash Belt Passes
Through Here
Recline Section
Step 3:
Ensure that you use the
REARWARD-FACING BELT PATH
identified by the following label.
