9
6. Once the battery on channel 1 is fully charged, the
battery on channel 2begins charging:
- Channel 1: Green LED on and not fl ashing
(battery charged)
- Channel 2: Green LED fl ashes quickly
throughout the charge.
3. SLEEP MODE complete:
- The charger’s LED stays red (not fl ashing).
- Channel1’s LED (and channel 2’s if there are 2 batteries) stays green (not fl ashing).
The battery must be removed from the charger and stored in the case.
Indicate that wintering is disabled when the mains plug is disconnected
To enable or disable wintering, the wintering button must be pressed.
7. The two batteries are charged:
- Channel 1: Green LED on (stops fl ashing).
- Channel 2: Green LED on (stops fl ashing).
Storing the battery / Putting the battery to Sleep Mode
or Winter Mode
To keep your batteries in good condition
(at the end of every pruning season or when not used for more
than 1 month) the following process must be applied (this process can take up to 10 hours per battery)
Channel 2
4. Place the battery on channel 2
of the charger.
5. If the battery on channel 1 is charging, the battery on
channel 2 switches to a waiting charge status:
- Channel 1: Green LED fl ashes quickly
throughout the charge.
- Channel 2: Green LED fl ashes slowly
throughout the wait.
A second battery can be placed on the charger:
Channel 1
Channel 2
1. Place the battery (or batteries) on the charger.
NOTE: If there are two batteries on the charger,
the sleep mode will be carried out on both batteries,
one after the other.
2. Press the SLEEP button to begin the process.
The LED switches to red (not fl ashing) and the charging
LED fl ashes green.
NOTE: If there are two batteries on the charger,
the sleep mode will be carried out on both batteries,
one after the other.
Channel 1
Charging a second battery
NOTMAL1B15_ENUSA_01.indd 9
NOTMAL1B15_ENUSA_01.indd 9
15/07/2020 10:40:51
15/07/2020 10:40:51
