C-COM Satellite Systems Inc.
Page 125 of 164
8.2.3.8. Advanced Search Configuration
Fig. 97:
Advanced Satellite Search Configuration options
Multi-Sat Search
Multiple satellite search allows the user to configure multiple satellites and search
continuously on the configured satellites (SAT0, SAT1 or SAT2) if search on the first
selected satellite fails, search will automatically start on the second configured satellite in
the list. If search on all three fail a message will be displayed informing the operator of
the search status. This feature must also be enabled if using a modem with dual beam
search such as iDirect.
Enable Inclined Satellite Orbit (Re-peak Time)
Enabling this option will allow the system to maintain signal with an inclined orbital
satellite. The user may select the time difference between each re-peak on the inclined
orbital satellite without disabling the transmitter and maximizing on the signal strength.
This feature has been modified to support Ka platforms’ that shift off signal due to
shifting ground and or environment conditions. The inclined mode routine will exit its
operation once the Stop button is depressed leaving the configuration selection enabled.
This option will not work properly if Motion Protection is enabled at the same time,
disable Motion Protection when inclined option is enabled.
DIS: Disabled
1: Re-peak every 10 minutes
2: Re-peak every 30 minutes
3: Re-peak every 1 hours
4: Re-peak every 2 hours
5: Re-peak every 3 hours
6: Re-peak every 4 hours
7: Re-peak every 6 hours
8: Re-peak every 8 hours
9: Re-peak every 12 hours
