Inepro IP Card Reader, Technical Manual

Page: 33 / 46

Software configuration settings
28
Multi tag:
Setting Description Value Card Types Behaviour
Setting 1
IP reader will read the
f ollowing protocols:
EM4x02, EM4x05,
EM4x50, hitag1, hitag2,
Q5 and Ti-RFID.
Because of the emulation
of the EM4x02 card and
the EM4x05 card by the
Q5 card, these dif f erent
settings of Setting 1 are
supported.
0
EM4x50, hitag1,
hitag2, Q5 and Ti-
RFID
-
1 EM4x02, EM4x05,
EM4x50, hitag1,
hitag2 and Ti-RFID -
3 EM4x02, EM4x05,
EM4x50, hitag1,
hitag2 and Ti-RFID The card data of the
EM4x02 cards will be
processed and send in
rev ersed order.
5 EM4x02, EM4x05,
EM4x50, hitag1,
hitag2 and Ti-RFID The card data of the
EM4x05 cards will be
processed and send in
rev ersed order.
7 EM4x02, EM4x05,
EM4x50, hitag1,
hitag2 and Ti-RFID The card data of the
EM4x02 and EM4x05
cards will be processed
and send in rev ersed
order.
Setting 2 Not applicable - - -
Setting 3 Not applicable - - -
Data 1 Not applicable - - -
Data 2 Not applicable - - -
Warning: Processing and sending of data in reversed order not
tested for the EM4x05 cards.
Mifare:
Setting Description Value Card Types
Setting 1
The Mif are reader supports the 4
by tes Mif are card serial number and 7
by tes Desf ire card serial number.
Setting 1 will be used to determine if
the order of the 4 by tes Mif are card
serial number should be rev ersed.
Only 4 by tes of the Desf ire card
serial number are used to calculate
the decimal card number.
0
Card serial number
is calculated f rom
the raw data in the
rev ersed order.
1
Card serial number
is calculated f rom
the raw data in the
normal order.
Setting 2 Not applicable - -
Setting 3 Not applicable - -
Data 1 Not applicable - -
Data 2 Not applicable - -