Inepro IP Card Reader, Technical Manual

Page: 30 / 46

25 - Inepro IP Reader (Konica Minolta)
Name
Key Description
Name
The name of this IP reader (like 'Printer Q745') This name will also be used as
host name, it is sent to the DHCP serv er and DNS serv er if they are
enabled.
IP config
Key Description
Dy namic Host
Conf iguration
Protocol
Enabled if DHCP be used, disabled if the network inf ormation need to be
f illed out manually .
IP The IP-address f or the IP reader.
Netmask
The netmask (only used when using subnetting, ask y our sy stem
administrator, if y ou're not sure). Standard v alue 255.255.255.0
Gateway
The IP address of the gateway (The gateway is de serv er that is located
between two networks, like the Internet and y our local network). It is usually
the same address as the DNS serv er.
Domain Name
Sy stem The IP address of the serv er with the Domain Name Sy stem, the sy stem
that transf orms names to IP-addresses and v ice v ersa.
Server config settings
Key Description
Serv er 1 IP The address of the serv er that the IP reader should contact.
Serv er 2 IP
The address of the back-up serv er that the IP reader should contact. It will be
contacted if the f irst serv er does not respond.
Serv er 1 name
When DNS is used the name of the serv er can be entered, the IP-address
v alue f or this serv er will be ignored, and retriev ed f rom the DNS serv er.
Serv er 2 name
When DNS is used the name of the serv er can be entered, the IP-address
v alue f or this serv er will be ignored, and retriev ed f rom the DNS serv er
Key set
Key set will giv e the possibility to set the encry ption key between the IP
reader and the serv er. At the time of writing the v alue as not y et used and
should alway s be set to '1'.